Welcome all 928 forum refugees!
  • User avatar
  • User avatar
  • User avatar
  • User avatar
User avatar
By h2pmr
#73184
has anybody found a viable replacement for the part the tool panel knobs turn into ?
part number 928 551 203 02 pictured below, as its NLA, or is it a 3D print job?

cheers
Phil
Image
Attachments
IMG_4284.JPG
IMG_4283.JPG
IMG_4282.JPG
IMG_4281.JPG
IMG_4280.JPG
User avatar
By worf
#73192
SeanR wrote: Wed Apr 14, 2021 3:17 pm I'm staring at the pictures and I have no idea what that is or where it goes.
Yeah.

Should I be embarrassed to write that I have never had to look (with an inspection mirror and light) at whatever receiver is used for the tool panel closure?

@h2pmr That’s a long way of saying: Yes, either used or 3d-print I guess.
User avatar
By h2pmr
#73199
3D printing it's going to be, i will let all know how i get on.

cheers
Phil
Attachments
IMG_4285.JPG
User avatar
By worf
#73225
Well, at least I can find it in PET :)

Image
User avatar
By Addlight
#73237
928intl.com's web site says they have used ones for $10.

Matt
mr928 liked this
User avatar
By h2pmr
#74932
after many emails have finally found a company who will 3D print them, should, fingers crossed have them in 4-6 weeks.
if you are reading this Roger do you want any?

cheers
Phil
Foam Cannon and Pressure Washers

I've got a power washer but never use it for the[…]

mid intake refresh, water bridge seals

Prior to doing my intake refresh, I had a slight w[…]

Opel Ampera

Switched the tires to summer Conti Eco 6 and what […]

Duplicate post from Rennlist.... For the Fun Runs[…]