Welcome all 928 forum refugees!
  • User avatar
  • User avatar
User avatar
By maddog2020
Its been so long since I've seen a stock front caliper on a 928 my memory has gotten the best of me. I've got the Brembo GT caliper setup and a set of Roger's aftermarket stainless brake lines. I'm not sure how to clock the fitting on the caliper, and I the brake hose port on the Brembo calipers are in a different location.

Does anyone have pics of the aftermarket lines installed on a GTS or S4?
Formula 1 2020 And Beyond

Rules are rules but this is one instance when the […]

$249 on line, $750 plus installation at a dealer, […]

78-86 vs 87-95 lower rad hose

always use the zip tie for that hose. There is a p[…]

There's a bit of carbon there, as you note. Maybe[…]